[LinuxBIOS] MB1030 / 3036 VGA comes up :D

[Goodrich,Steven]

In our BIOS for the related platform, I don't see how we're disabling PCI.  I see that we set DC_FB_ST_OFFSET (GX_BASE + 0x8310) to 0 and also DC_DUR_ST_OFFSET (GX_BASE + 0x8318).

Is the 00:12:4 a PCI address?  Does that decode to Bus 0, Device 12 (decimal?), Function 4?

    -- Steve G. 

Steve Goodrich (Steven.Goodrich at amd.com)
Advanced Micro Devices, Inc.

-----Original Message-----
From: linuxbios-bounces at linuxbios.org [mailto:linuxbios-bounces at linuxbios.org] On Behalf Of Christian Sühs
Sent: Friday, April 28, 2006 11:16 AM
To: Ronald G Minnich
Cc: Stefan Reinauer; Goodrich,Steven; LinuxBIOS
Subject: Re: [LinuxBIOS] MB1030 / 3036 VGA comes up :D


> 
> in acalc, you would do this:
> x40000000
> 30
> sr
>

Well, the graphic instructions for the geode are disabled in that case :D

because this value is writen to b8h (Graphic Control Registers)

However,
I'm not sure what I should do next.

I think i will play around with the BC_XMAP_1 registers and will set the amd prefered values :D

Currently the whole video RAM section seems to be disabled.
a0000 - bffff

chris

> 
> and get 1.
> 
> ron
> 


--
linuxbios mailing list
linuxbios at linuxbios.org
http://www.openbios.org/mailman/listinfo/linuxbios