[LinuxBIOS] New Target for LinuxBios MB1030 / 3036

Ronald G Minnich rminnich at lanl.gov
Fri Apr 21 18:52:42 CEST 2006

Christian Sühs wrote:
>> PCI: 00:13.0 init
>> Devices initialized
>> Copying IRQ routing tables to 0xf0000...done.
>> Verifing copy of IRQ routing tables at 0xf0000...failed

you need to make sure shadow bios is enabled, OR just build it with 
CONFIG_COMPRESS=0. IF  you build with CONFIG_COMPRESS=0, you will still 
get this message, but it does not matter.
> Filo tries first to init vga and serial, disabling vga makes no 
> different, it fails too.
> Serial needs an IRQ, right?

not for filo.

be sure to rebuild filo completely if you turn off vga in config. OR I 
can send you a known-good serial-only filo

> Is there any callback from filo to LB?

no. LB does not have callbacks.

> Needs filo the LB Irq Table on 0xf0000 to initialise?




More information about the coreboot mailing list