[LinuxBIOS] Build broken?

[Beneo]

David,

Do you know a tar ball with recent date that is relatively good that I can
download?

Thanks

Beneo


----- Original Message ----- 
From: "David Hendricks" <cro_marmot at comcast.net>
To: <linuxbios at openbios.org>
Sent: Tuesday, November 08, 2005 9:26 PM
Subject: Re: [LinuxBIOS] Build broken?


> Probably bad luck. This has been known to happen, and IIRC one of the
> points at the recent LinuxBIOS summit was to post 'stable' tarballs
> where everything should build without hassle, even if it means rolling
> back some features. Stay tuned...
>
> On Tue, 8 Nov 2005 17:01:37 -0800
> "beneo" <beneo at comcast.net> wrote:
>
> > Hi,
> > I download a lateset snapshot from linuxBIOS.org yesterday. I don't
> > know if it is bad luck or something, I can not successfully build any
> > BIOS from the tree I downloaded. I tried following three platform.
> >
> > tyan/s2891
> > tyan/s2895
> > amd/serenade
> >
> > Does anybody has similar issue or know what happened?
> >
> > Below are the details on the things I got for these three different
> > target platform
> >
> > 1. Both tyan/s2891 and tyan/s2895 have similar behavior
> >
> > I changed a few lines in Options.lb:
> >
> > default USE_DCACHE_RAM=1
> > default CONFIG_USE_INIT=1
> > default DEFAULT_CONSOLE_LOGLEVEL=7
> > default  MAXIMUM_CONSOLE_LOGLEVEL=7
> >
> > I get a error output like below: (Note: Changing options in the
> > Options.lb above were not the cuase of the problem. Without changing
> > USE_DCACHE_RAM and CONFIG_USE_INIT, I still get same results)
> >
> > ------------
> > gcc -m32 -nostdlib -nostartfiles -static -o linuxbios_ram
> > -T /export/1/new/src/config/linuxbios_ram.ld linuxbios_ram.o
> > linuxbios_ram.o(.text+0x13db9): In function
> > `smp_write_config_table': : undefined reference to `get_apicid_base'
> > collect2: ld returned 1 exit status make[1]: *** [linuxbios_ram]
> > Error 1 make[1]: Leaving directory
> > `/export/1/new/targets/tyan/s2895/s2895/normal' make: ***
> > [normal/linuxbios.rom] Error 1
> >
> > 2. amd/serenade gets the build error like below. It probably is the
> > side product of the tree enabled dual core and cache as RAM? -----
> > gcc -m32 -nostdlib -nostartfiles -static -o linuxbios_ram
> > -T /export/1/new/src/config/linuxbios_ram.ld linuxbios_ram.o
> > linuxbios_ram.o(.text+0x14d2): In function `model_fxx_init': :
> > undefined reference to `get_node_core_id'
> > linuxbios_ram.o(.text+0x14e6): In function `model_fxx_init': :
> > undefined reference to `amd_sibling_init' collect2: ld returned 1
> > exit status make[1]: *** [linuxbios_ram] Error 1
> > make[1]: Leaving directory
> > `/export/1/new/targets/amd/serenade/serenade/normal' make: ***
> > [normal/linuxbios.rom] Error 1
> >
> >
> > Any help would be appriciated.
> >
> > Thanks
> >
> > Beneo
>
>
> -- 
>
> -- 
> LinuxBIOS mailing list
> LinuxBIOS at openbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios