FILO dependencies
yhlu
yinghailu at gmail.com
Wed Mar 2 08:59:00 CET 2005
Why not try Etherboot at first? That would be easier.
On Wed, 2 Mar 2005 20:06:40 +0100, Stefan Reinauer <stepan at openbios.org> wrote:
> * Stephen.Kimball at bench.com <Stephen.Kimball at bench.com> [050302 19:40]:
> >
> > I'm using FILO with nVidia reference board with a CK804. I've got
> > LinuxBIOS to load FILO and FILO sees the IDE controller but not the
> > drive. I thought FILO was device independent, but could the IDE
> > controllers on the CK804 require FILO changes? Thanks.
>
> You should be using 0.4.2 and be sure to set
> PCI_BRUTE_SCAN = 1
>
> You probably end up with filo not looking at anything but bus 0.
> Common problem on amd64 boards.
>
> Stefan
>
>
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
>
More information about the coreboot
mailing list