FILO dependencies

[Stephen.Kimball at bench.com]

I'm using FILO with nVidia reference board with a CK804. I've got LinuxBIOS to load FILO and FILO sees the IDE controller but not the drive.  I thought FILO was device independent, but could the IDE controllers on the CK804 require FILO changes?
Thanks.

Steve

----------------------- serial output -----------------------------------
Press <Enter> for default boot, or <Esc> for boot prompt...
boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img
 root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts
malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks)
malloc_diag: alloc: 640 bytes (6 blocks), free: 15736 bytes (1 blocks)
file_open: dev=hdc1, path=/boot/vmlinuz-2.6.9-1.667smp
find_ide_controller: found PCI IDE controller 10de:0053 prog_if=0x8a
find_ide_controller: secodary channel: compatibility mode
find_ide_controller: cmd_base=0x170 ctrl_base=0x374
Detected floating bus
No drive detected on IDE channel 1
devopen: failed to open ide
malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks)
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img
 root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts
malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks)
malloc_diag: alloc: 640 bytes (6 blocks), free: 15736 bytes (1 blocks)
file_open: dev=hdc1, path=/boot/vmlinuz-2.6.9-1.667smp
Drive 2 does not exist
devopen: failed to open ide
malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks)
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img
 root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts