Geode GX1 and IRQ tables
Ronald G. Minnich
rminnich at lanl.gov
Tue Mar 1 05:16:01 CET 2005
On Tue, 1 Mar 2005, ramesh bios wrote:
> Would I be able to test if Linux 2.6.10 is able to
> parse the normal BIOS' PIRQ table by booting linux
> with acpi=off?
no, the problem is that the BIOSes we have seen in some cases just assign
a bunch of IRQs, and ignore their own tables. Hence, the problem gets
harder.
> I'm still somewhat confused though. At the point that
> LB calls the kernel, shoudn't LB have used the IRQ
> table values to set the PCI config space registers to
> write IRQ values to the PCI config registers and such?
no, we have always let Linux do this because:
- for a given version of linux, you really don't know what tables it will
use, so it makes no sense to do a lot of work and then have linux
repeat it
- there are multiple options in some cases for which IRQ to use, and
again, you want to let the OS figure that out
ron
More information about the coreboot
mailing list