[LinuxBIOS] util/getpir & util/mptable [Was "A boot problem...."]
yhlu
yinghailu at gmail.com
Thu Jul 28 23:13:57 CEST 2005
If there are several peer root bus, the irq_table.c must be modified maually.
Please refer to src/mainboard/tyan/s2895/irq_table.c
YH
On 7/28/05, Ronald G. Minnich <rminnich at lanl.gov> wrote:
>
>
> On Thu, 28 Jul 2005, Ken Fuchs wrote:
>
> > Sorry, I worded the above paragraph far too strongly. I meant to say
> > that booting a COTS BIOS & Linux and running util/getpir and
> > util/mptable can be very useful in LinuxBIOS v2, but hand editing the
> > results may be required. It would be nice, if util/getpir and
> > util/mptable could be modified so hand editing the resultant irq_table.c
> > and mptable.c would not be needed. This may not be very useful for
> > experienced LinuxBIOS developers, but can save a lot of porting time for
> > people who don't have as much LinuxBIOS or other BIOS experience.
>
> ah! tell me how it needs to change. I just used getpir recently and did no
> hand editing.
>
> ron
>
> _______________________________________________
> LinuxBIOS mailing list
> LinuxBIOS at openbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios
>
More information about the coreboot
mailing list