Anybody having success with EPIA 800? (was Re: EPIA halting after vt8601 init?)

[Al Hooton]

On Fri, 2005-01-21 at 10:03 -0700, Ronald G. Minnich wrote: 
> well, send me an lspci so i can be double sure I have these boards, and we 
> will take a look next week. I'm sorry to see you're having trouble. 

Thanks, Ron.  I know you guys are busy, I'm not asking for a lot of help
(yet?).  At this point, I'm curious as to whether this lspci output
matches the EPIA 800 boards you have running LB in-house?  Who knows,
maybe VIA has done a rev 2 (3, 4...?) of these boards and we'll have to
figure out what they did.

On the other hand, if the board matches yours, then there is just
something going on that I still don't grok (much more likely...
8^)=    ).  I'm going to pursue the path suggested by Mark Wilkinson as
well (PC100 vs PC133 issue), I'll post back to the list if I find
anything that way.

-----------
[al at underdog al]$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia]
(rev 05)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge]
(rev 10)
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1e)
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1e)
00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 51)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1
(rev 6a)
-----------


-Al

-- 


Al Hooton
al-at-hootons-dot-org

========
Maintainer of the linux-based open-source project Parapin.
http://www.sf.net/projects/parapin/
========