Running with VGA
Li-Ta Lo
ollie at lanl.gov
Thu Jan 13 08:50:01 CET 2005
On Thu, 2005-01-13 at 12:23, YhLu wrote:
> Works not.
>
It is "works now" ?????
Ollie
> I happen to delete in pci_read_config(dev, PCI_ROM_ADDRESS)
>
> -----Original Message-----
> From: YhLu
> Sent: Thursday, January 13, 2005 10:20 AM
> To: YhLu; 'Li-Ta Lo'
> Cc: 'Sagiv Yefet'; 'LinuxBIOS'
> Subject: RE: Running with VGA
>
> Move /* for on board device with embedded ROM image, the ROM image
> is at
> * fixed address specified in the Config.lb, the dev->rom_address is
> * inited by driver_pci_onboard_ops::enable_dev() */
> if ((dev->on_mainboard) && (dev->rom_address != 0)) {
> resource->base = dev->rom_address;
> resource->flags |= IORESOURCE_MEM | IORESOURCE_READONLY |
> IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
> return;
> }
>
> To get_pci_rom_resource end.
>
> PCI: 02:06.0 30 <- [0x00fff80000 - 0x00fff9ffff] rom
>
> But
> PCI: 02:06.0 init
> pci_rom_probe, rom address for PCI: 02:06.0 = 1d300
> pci_rom_probe, Incorrect Expansion ROM Header Signature 1fe8
>
> I wonder if we can not store that value into PCI_ROM_ADDRESS
>
> YH
>
> -----Original Message-----
> From: YhLu
> Sent: Thursday, January 13, 2005 10:06 AM
> To: YhLu; Li-Ta Lo
> Cc: Sagiv Yefet; LinuxBIOS
> Subject: RE: Running with VGA
>
> I guess it can not get size correctly.
> So you need to change the pci_get_rom_resource to get the size for it.
>
> And then assign the base to it.
>
> YH
>
> -----Original Message-----
> From: YhLu
> Sent: Thursday, January 13, 2005 9:49 AM
> To: Li-Ta Lo
> Cc: Sagiv Yefet; LinuxBIOS
> Subject: RE: Running with VGA
>
> PCI: 02:06.0 30 <- [0x00fff80000 - 0x00fff7ffff] rom
>
> It seems it can not be processed by pci_set_resource properly.
>
> YH
>
> -----Original Message-----
> From: Li-Ta Lo [mailto:ollie at lanl.gov]
> Sent: Wednesday, January 12, 2005 10:10 PM
> To: YhLu
> Cc: Sagiv Yefet; LinuxBIOS
> Subject: RE: Running with VGA
>
> On Wed, 2005-01-12 at 23:07, YhLu wrote:
> > You assign the value to the new resource.
> >
> > I wonder if it will confuse the resource allocator. Because the range is
> out
> > of touch of allocator.
> >
>
> I don't think so but I am not sure neither. The resource is flagged as
> FIXED and ASSIGNED. The resource allocator should leave that resource as
> is. If it does not work, we can just write dev->rom_address to
> PCI_ROM_ADDRESS directly in pci_get_rom_resource() and the
> pci_rom_probe() can still be unchanged.
>
> Could you try the code?
>
> Ollie
>
> > YH
> >
> > -----Original Message-----
> > From: Li-Ta Lo [mailto:ollie at lanl.gov]
> > Sent: Wednesday, January 12, 2005 9:48 PM
> > To: YhLu
> > Cc: Sagiv Yefet; LinuxBIOS
> > Subject: RE: Running with VGA
> >
> > On Wed, 2005-01-12 at 21:02, YhLu wrote:
> > > Committed.
> > >
> > > Also I added readme in /drivers/pci/onboard/onboard.c
> > >
> > >
> > > YH
> > >
> >
> > I made some modification which should utilize the resource allocation
> > code and minimize the impact of the embedded ROM image. I was doing
> > it blindly, please test it on your platform.
> >
> > Ollie
> >
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list