[LinuxBIOS] where do we stand

[Young, Jeff]

Stefan,
	I have tried several snapshots and none of them build correctly.
They
All have the same problem:  

/usr/lib/gcc-lib/i486-suse-linux/3.3/../../../../i486-suse-linux/bin/ld:
section .rodata.str1.32 [00000000fffbff80 -> 00000000fffc015a] overlaps
section .reset [00000000fffbfff0 -> 00000000fffbffff]
collect2: ld returned 1 exit status
make: *** [linuxbios] Error 1

Any ideas?

Thanks,
Jeff


-----Original Message-----
From: Stefan Reinauer [mailto:stepan at openbios.org] 
Sent: Monday, December 05, 2005 6:12 AM
To: Young, Jeff
Cc: linuxbios at openbios.org
Subject: RE: [LinuxBIOS] where do we stand

> 
> 
> Howdy,
> 	Can I take it from this thread that the S2895 Tyan board will
> not work now?  I am just getting into this and was going to experiment
> on the S2895.
> 
> Thanks,
> Jeff Young
> 

The Tyan S2895 _should_ work with the current SVN tree, but it is still
untested. This applies for most other boards in the latest tree. We'll
gladly assist you if you are going to test this. As an option you can
always choose a snapshot from 1.5 months ago.

Stefan