[LinuxBIOS] etherboot + linuxbios

[Lu, Yinghai]

It works well...

YH

-----Original Message-----
From: linuxbios-bounces at openbios.org
[mailto:linuxbios-bounces at openbios.org] On Behalf Of Jonathan McDowell
Sent: Monday, December 12, 2005 2:37 PM
To: Jason Schildt
Cc: linuxbios at openbios.org
Subject: Re: [LinuxBIOS] etherboot + linuxbios

On Mon, Dec 12, 2005 at 03:30:33PM -0700, Jason Schildt wrote:
> On Mon, Dec 12, 2005 at 10:17:29PM +0000, Jonathan McDowell wrote:
> > What versions of etherboot are people using with LinuxBIOS? I've had
> > problems with 5.4.1 just giving gibberish on the serial console so
have
> > ended up using 5.2.6; is this expected?
> If you're getting gibberish over serial, then your baud rate is set
> wrong.  More than likely, LB is set to 115200 and Etherboot is set to
> 9600.  Or visa versa.

I'm pretty sure I tried both with -DDCOMPRESERVE (which I understand
should make etherboot use the LB settings) and -DCONSPEED=115200 (which
is what lb is set to).

If you (or anyone else) can confirm you're using 5.4.1 without problems
with LB on a serial console then I'll go back and try again, but really
I just wanted to know I wasn't spending time debugging something that
was known not to work.
 
J.

-- 
/-\                             |    noodles is almost a national
|@/  Debian GNU/Linux Developer |          pastime in japan
\-                              |

-- 
LinuxBIOS mailing list
LinuxBIOS at openbios.org
http://www.openbios.org/mailman/listinfo/linuxbios