[LinuxBIOS] compile errors on tyan S2881

[yhlu]

the ROM_IMAGE_SIZE should be 0x20000 in target MB Config.

Please checkt that

You seem set that to ROM_IMAGE_SIZE to 0x16000, So change that to
0x20000 will solve the problem...

YH

On 12/2/05, Richard Smith <smithbone at gmail.com> wrote:
> >   /usr/bin/ld: linuxbios: section .rom lma 0xfffb0000 overlaps previous sections
> >   / usr/bin/ld: linuxbios: section .init lma 0xfffb0120 overlaps previous sections
> >   /usr/bin/ld: linuxbios: section .data lma 0xfffb2fd0 overlaps previous sections
> >   /usr/bin/ld: linuxbios: section .init.data lma 0xfffb2fd0 overlaps previous sections
> >   collect2: ld returned 1 exit status
> >   make[1]: *** [linuxbios] Error 1
>
> I don't know a whole lot about that board but normally that means your
> ROM_IMAGE_SIZE is too small.
>
> --
> Richard A. Smith
>