[LinuxBIOS] Re: post code "fe" means what ?

[Stefan Reinauer]

* Huang-Jen Wang <huangjen.wang at gmail.com> [050412 10:46]:
> Hi Stefan,
> The message as follow:
 
> setup_timers: CPU 2005 MHz
> pci_init: Scanning PCI: found 4 devices
> malloc_diag: alloc: 184 bytes (4 blocks), free: 16192 bytes (1 blocks)
> pci_init: 00:18.0 1022:1100 0600 00
> pci_init: 00:18.1 1022:1101 0600 00
> pci_init: 00:18.2 1022:1102 0600 00
> pci_init: 00:18.3 1022:1103 0600 00
> Press <Enter> for default boot, or <Esc> for boot prompt... timed out
> boot: hda2:/boot/vmlinuz root=/dev/hda2 console=tty0 console=ttyS0,115200
> malloc_diag: alloc: 264 bytes (5 blocks), free: 16112 bytes (1 blocks)
> malloc_diag: alloc: 280 bytes (6 blocks), free: 16096 bytes (1 blocks)
> file_open: dev=hda2, path=/boot/vmlinuz
> find_ide_controller: PCI IDE #0 not found
> IDE channel 0 not found
> devopen: failed to open ide

The IDE controller is not detected. Did you set PCI_BRUTE_SCAN = 1
in the filo config file?

Stefan