EPIA-M - which board for freebios2?

Marc Nicholas marc at geekythings.com
Thu Sep 16 13:34:00 CEST 2004

That's a real shame as it's the board I'd most like to use :-(


On Thu, 16 Sep 2004 Trellix78 at aol.com wrote:

> I'm using the EPIA M10000:
>      vt8623 northbridge (CLE266) and vt8235 southbridge.
> I haven't been able to get V2 to compile as yet for it.
> V1 compiles and runs properly but AGP doesn't work.
> I can't seem to find the right way to setup the GART and GATT.
> Without the datasheets, what can I do?
> Without AGP support, Xwindows will run but playing videos or doing
> 3D will crash the system.
> Also, I'm not sure how to setup the video encoder.
> I wouldn't recommend the EPIA M10000 simply because VIA has been
> anything but free and open with the specs.  However, that's what I'm
> using until something better comes along.  Good luck.
> David
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios

More information about the coreboot mailing list