[Etherboot-developers] lb+eb+filo in epia-5000

[elife elife]

Hi Yinghai Lu,
  I don't know whether I am using the last patch. Where can I find the last 
patch? I browse the eb's cvs tree but seems filo not merge yet.
  My hardware is VIA EPIA-5000 board. The output of lspci just said 
00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 
05)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 
10)
00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1e)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1e)
00:11.4 Non-VGA unclassified device: VIA Technologies, Inc. VT8235 ACPI 
(rev 10)00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
VT82C686 AC97 Audio Controller (rev 40)
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 
Modem] (rev 20)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 
51)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 
6a)

And when I boot from lb, related boot info:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 11:08:56 Sep  6 2004
host/usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:11.2
IRQ routing conflict for 00:11.2, have irq 12, want irq 11
IRQ routing conflict for 00:11.3, have irq 12, want irq 11
PCI: Sharing IRQ 11 with 00:12.0
host/usb-uhci.c: USB UHCI at I/O 0x1c00, IRQ 12
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:11.3
IRQ routing conflict for 00:11.2, have irq 12, want irq 11
IRQ routing conflict for 00:11.3, have irq 12, want irq 11
PCI: Sharing IRQ 11 with 00:12.0
host/usb-uhci.c: USB UHCI at I/O 0x1c20, IRQ 12
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver

Thanks a lot!


>From: "Yinghai Lu" <yhlu at tyan.com>
>To: "'elife elife'" <rimy2000 at hotmail.com>,   
<etherboot-developers at lists.sourceforge.net>
>CC: <linuxbios at clustermatic.org>
>Subject: RE: [Etherboot-developers] lb+eb+filo in epia-5000
>Date: Tue, 7 Sep 2004 09:19:57 -0700
>
>Are you using the last patch?
>
>What's your USB controller model and etc?
>
>Regards
>
>YH
>

_________________________________________________________________
免费下载 MSN Explorer:   http://explorer.msn.com/lccn/