FYI: Merge in progress...
YhLu
YhLu at tyan.com
Thu Oct 21 14:00:01 CEST 2004
Why just set subsystem id, in amd_8111.c enable_dev function?
That would more easy.
Need one switch case to figure out different reg position.
Regards
YH
-----Original Message-----
From: Li-Ta Lo [mailto:ollie at lanl.gov]
Sent: Thursday, October 21, 2004 11:18 AM
To: Eric W. Biederman
Cc: YhLu; 'Ronald G. Minnich'; 'LinuxBIOS'
Subject: Re: FYI: Merge in progress...
On Thu, 2004-10-21 at 12:00, Eric W. Biederman wrote:
> At this point we should be able to look at the device tree and
> see if we need to use and io range register or the RdRam WrDram bits.
>
Are you talking somthing in my mind ? I hope in the mtrr.c for K8
instead of hack with the mem_map we have:
setup_mtrr()
{
if (search_for_vga_device_on_the_tree() == FOUND) {
enable_rd_wr_mem_in_fixed_mtrr();
clear_rd_wr_mem_for_legacy_vga_buffer();
set_IORR_to_AGP_aperture();
} else {
disable_rd_wr_mem();
}
do_some_other_thigs();
}
And the code is executed on each processors.
Ollie
More information about the coreboot
mailing list