Adding a PCI device that doesn't exist (yet)
Jay Miller
jmiller at actuality-systems.com
Wed Oct 6 11:54:00 CEST 2004
Thanks for your help. Certainly that's not ideal, but it may turn out
to be our only option.
Currently I'm investigating using proc_pci_attach_device() at the kernel
level to add the device from the driver module init(post-program), but
it's not looking promising.
Thanks,
Jay Miller
781-229-7812x117
Actuality Systems, Inc.
jmiller at actuality-systems.com
-----Original Message-----
From: Ronald G. Minnich [mailto:rminnich at lanl.gov]
Sent: Wednesday, October 06, 2004 12:23 PM
To: YhLu
Cc: Jay Miller; linuxbios at clustermatic.org
Subject: RE: Adding a PCI device that doesn't exist (yet)
On Tue, 5 Oct 2004, YhLu wrote:
> Can you for the FPGA programming in the auto.c and issue an soft_reset
in
> auto.c?
I think this can work with the current mechanisms. You need to have your
chip programmed pre-pci-scan, and the current config mechanism supports
that fine.
Is this V1 or V2, I forget.
ron
More information about the coreboot
mailing list