PCI guru consultant needed

[Stefan Reinauer]

* Richard Smith <rsmith at bitworks.com> [041001 18:47]:
> Somehow the SDRAM inside the M1 chip is failing to initialize properly. 
>  The video output has all the right VSYNC and HSYNC for the 800x600 
> mode I setup but a black screen and a large square block for the cursor. 
>  If I exit X and try to write/read a value into video ram I get garbage 
> back.  This works on the Ausu P2B.

Wild guess: 
 - Timing issues?
 - missing bridge initialization?

Stefan