Tyan/s2735

[Gin]

Steven,
Thanks for the info. I've got the ram up by filling the some values in
North Bridge(I reference a regular bios).

I have an essential question about the code base for Tyan/s2735. Has it
ever successfully built and run on that board? I have to make sure the
code I am currently building our board on is good.

Thanks   

-----Original Message-----
From: linuxbios-admin at clustermatic.org
[mailto:linuxbios-admin at clustermatic.org] On Behalf Of Steven James
Sent: Friday, November 05, 2004 10:40 PM
To: Gin Lin
Cc: linuxbios at clustermatic.org
Subject: Re: ram init

Greetings,

It's been a while since I've looked at it, but when I last looked, it
did
sometimes need power cycled to restart. I worked around that by making
the
kernel reboot by writing 0x0e to port 0xcf9. That causes the southbridge
to do a 3 second power off.

G'day,
sjames



On Fri, 5 Nov 2004, Gin Lin wrote:

> Does anyone know if the raminit.c under intel/E7501 is stable enough?
I am
> having a problem with the system reseting when it jumps to the first
address
> in the ram. Could the procedures of writing NorthBrige registers have
> problems?
>
> thanks,
> Gin
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
>

||||| |||| |||||||||||||  |||
by Linux Labs International, Inc.
   Steven James, CTO

55 Marietta Street
Suite 1830
Atlanta, Ga 30303
866 824 9737 support

_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios