FILO boot from SATA disk on SI 3114.

YhLu YhLu at tyan.com
Thu May 6 18:28:01 CEST 2004


With some changes to filo, the sata can be used as normal IDE device in
filo.

Last problem in filo is only can boot from port 0 and port 1, and can not
boot from port 2 and port 3. That is SI 3114 limitation.

After install SUSE 9 Pro for AMD64, use following can boot into disk.
hde2:/boot/vmlinuz initrd=/boot/initrd ro root=/dev/sda2 console=tty0
console=ttyS0,115200

Please note "root=/dev/sda2", because kernel in Suse think it is SCSI just
as new 2.6 kernel.

regards

YH


-----邮件原件-----
发件人: YhLu 
发送时间: 2004年4月28日 21:12
收件人: ron minnich; Langlois Evan
抄送: Hendricks David W.; linuxbios at clustermatic.org
主题: Re: LinuxBIOS Video?

1. S2875 support is in the CVS tree already.
2. ATI randon --- At this time, you may not get the output from very
beginning.
3. boot sata --- good question, I will try that. Maybe need to add some code
in filo. 

Regards

YH
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios



More information about the coreboot mailing list