答复: Which kernel for framebuffering?
YhLu
YhLu at tyan.com
Wed May 5 14:12:00 CEST 2004
What is your kernel version? 2.6?
Please check if the pc_kbd_init is called, 2.6 for X86-64/i386 need keyboard
be reset. It assume BIOS has did that for him.
Regards
YH
-----邮件原件-----
发件人: Hendricks David W. [mailto:dwh at lanl.gov]
发送时间: 2004年5月5日 12:25
收件人: YhLu
抄送: linuxbios at clustermatic.org
主题: Re: Which kernel for framebuffering?
Worked nicely :) The keyboard worked at FILO, but did not work after the
kernel booted. It didn't even show IRQ 1 in /proc/interrupts. Weird, but I
guess that's another matter. I'm just very, very happy to see Linux boot
into a console I can see on a real monitor :)
On Tue, 4 May 2004, YhLu wrote:
> David,
>
> Please refer to the patch for 2.4.22 and 2.6.5, or you can put that in CVS
> ...
>
> Also please refer to the matix to see which kernel you want to use.
>
> Please make sure enable ati xl framebuffer only in kernel config. ( don't
> enable noinit)
>
> Regards
>
> YH
>
> -----ÓʼþÔ¼þ-----
> ·¢¼þÈË: Hendricks David W. [mailto:dwh at lanl.gov]
> ·¢ËÍʱ¼ä: 2004Äê5ÔÂ4ÈÕ 13:31
> ÊÕ¼þÈË: YhLu
> ³ËÍ: linuxbios at clustermatic.org
> Ö÷Ìâ: Which kernel for framebuffering?
>
> We were able to build and boot LinuxBIOS with VGA support for an HDAMA.
> FILO came up on screen and the keyboard worked, but we've been unable to
> get Linux framebuffering to work using a 64-bit kernel. We were wondering
> if there's anything special you had to do to make it work, or any special
> kernel version or patches we need to use.
>
>
More information about the coreboot
mailing list