答复: S4882 support

[Li-Ta Lo]

On Tue, 2004-03-23 at 20:57, YhLu wrote:
> It seems the soft reset didn't rest the MB and ...
> 
> Ollie,
> 
> Can you check that in S2885? And I think if you changed the hard_reset and
> soft_reset to bus 1, it may not rest the ht.
> 

What ?? I have to change it to bus 1 to make the reset work on
S2885.

Ollie

> Regards
> 
> Yinghai Lu
> 
> -----邮件原件-----
> 发件人: YhLu 
> 发送时间: 2004年3月23日 19:22
> 收件人: ebiederman at lnxi.com; Stefan Reinauer; ron minnich
> 抄送: linuxbios at clustermatic.org
> 主题: S4882 support
> 
> Eric,
> 
> The ht reset in auto.c seems not thoroughly.
> 
> And it will stuck at hard_reset in amdk8_scan_chains. ( at this time can not
> access 8111 yet).
> 
> Regards
> 
> YH
> 
> LinuxBIOS-1.1.62.0_Normal Tue Mar 23 17:33:50 PST 2004 starting...
> setting up resource map....done.
> 04 nodes initialized.
> ht reset -Ram1.00
> XÀm1.01
> Ram1.02
> Ram1.03
> Ram2.00
> Ram2.01
> Ram2.02
> Ram2.03
> Ram3
> Initializing memory:  done
> Initializing memory:  done
> Initializing memory:  done
> Initializing memory:  done
> Clearing LinuxBIOS memory:  done
> Ram4
> Copying LinuxBIOS to ram.
> Jumping to LinuxBIOS.
> LinuxBIOS-1.1.62.0_Normal Tue Mar 23 17:46:40 PST 2004 booting...
> Finding PCI configuration type.
> PCI: Using configuration type 1
> Enumerating: AMD K8 Northbridge
> Enumerating: AMD K8 Northbridge
> Enumerating: AMD K8 Northbridge
> Enumerating: AMD K8 Northbridge
> Enumerating: AMD K8
> Enumerating: AMD K8
> Enumerating: AMD K8
> Enumerating: AMD K8
> Enumerating: AMD 8111
> Enumerating: Winbond w83627hf
> Enumerating buses...PCI: pci_scan_bus for bus 0
> PCI: 00:18.0 [1022/1100] enabled
> PCI: 00:18.1 [1022/1101] enabled
> PCI: 00:18.2 [1022/1102] enabled
> PCI: 00:18.3 [1022/1103] ops
> PCI: 00:18.3 [1022/1103] enabled
> PCI: 00:19.0 [1022/1100] enabled
> PCI: 00:19.1 [1022/1101] enabled
> PCI: 00:19.2 [1022/1102] enabled
> PCI: 00:19.3 [1022/1103] ops
> PCI: 00:19.3 [1022/1103] enabled
> PCI: 00:1a.0 [1022/1100] enabled
> PCI: 00:1a.1 [1022/1101] enabled
> PCI: 00:1a.2 [1022/1102] enabled
> PCI: 00:1a.3 [1022/1103] ops
> PCI: 00:1a.3 [1022/1103] enabled
> PCI: 00:1b.0 [1022/1100] enabled
> PCI: 00:1b.1 [1022/1101] enabled
> PCI: 00:1b.2 [1022/1102] enabled
> PCI: 00:1b.3 [1022/1103] ops
> PCI: 00:1b.3 [1022/1103] enabled
> amdk8_scan_chains max: 0 starting...
> Hyper transport scan link: 1 max: 1
> PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003
> PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007
> HyperT reset needed
> 
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
>