答复: S4882 support

[YhLu]

It seems the soft reset didn't rest the MB and ...

Ollie,

Can you check that in S2885? And I think if you changed the hard_reset and
soft_reset to bus 1, it may not rest the ht.

Regards

Yinghai Lu

-----邮件原件-----
发件人: YhLu 
发送时间: 2004年3月23日 19:22
收件人: ebiederman at lnxi.com; Stefan Reinauer; ron minnich
抄送: linuxbios at clustermatic.org
主题: S4882 support

Eric,

The ht reset in auto.c seems not thoroughly.

And it will stuck at hard_reset in amdk8_scan_chains. ( at this time can not
access 8111 yet).

Regards

YH

LinuxBIOS-1.1.62.0_Normal Tue Mar 23 17:33:50 PST 2004 starting...
setting up resource map....done.
04 nodes initialized.
ht reset -Ram1.00
XÀm1.01
Ram1.02
Ram1.03
Ram2.00
Ram2.01
Ram2.02
Ram2.03
Ram3
Initializing memory:  done
Initializing memory:  done
Initializing memory:  done
Initializing memory:  done
Clearing LinuxBIOS memory:  done
Ram4
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.62.0_Normal Tue Mar 23 17:46:40 PST 2004 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8
Enumerating: AMD K8
Enumerating: AMD K8
Enumerating: AMD K8
Enumerating: AMD 8111
Enumerating: Winbond w83627hf
Enumerating buses...PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] ops
PCI: 00:19.3 [1022/1103] enabled
PCI: 00:1a.0 [1022/1100] enabled
PCI: 00:1a.1 [1022/1101] enabled
PCI: 00:1a.2 [1022/1102] enabled
PCI: 00:1a.3 [1022/1103] ops
PCI: 00:1a.3 [1022/1103] enabled
PCI: 00:1b.0 [1022/1100] enabled
PCI: 00:1b.1 [1022/1101] enabled
PCI: 00:1b.2 [1022/1102] enabled
PCI: 00:1b.3 [1022/1103] ops
PCI: 00:1b.3 [1022/1103] enabled
amdk8_scan_chains max: 0 starting...
Hyper transport scan link: 1 max: 1
PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003
PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007
HyperT reset needed