答复: unreliably booting off a BCM5701.

YhLu YhLu at tyan.com
Mon Mar 22 12:42:01 CET 2004


Stefan,

You may try to increase the heap size in config. I meet such problem in
S2882 and solved that by increasing heap size.

Regards

YH

-----邮件原件-----
发件人: Stefan Reinauer [mailto:stepan at suse.de] 
发送时间: 2004年3月22日 9:45
收件人: linuxbios at clustermatic.org
主题: Re: unreliably booting off a BCM5701.

* Stefan Reinauer <stepan at suse.de> [040322 18:01]:
> Link is up at 1000 Mbps, full duplex. TX RX flow control
> ..Me: 192.168.0.2, Server: 192.168.0.1
> Loading 192.168.0.1:kernel.elf ...(ELF)... ...........  [..] ......done
> Firmware type: LinuxBIOS

Also, I could not get beyound this point with a Linux 2.6.5rc1 kernel.
Linux 2.4.x boots through to userland... It looks like a kernel issue,
but could it come from mkelfImage?

Stefan

  
-- 
  Stefan Reinauer, SUSE LINUX AG
Head of Architecture Development
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios



More information about the coreboot mailing list