Compile Error while doing make
Thomas Leidenfrost
leidenfrost at corscience.de
Mon Jul 19 13:12:01 CEST 2004
Now I am one step closer to the end, thanks for your patience and help!
Probably not the last, but my actual problem: :-)
...dd if=linuxbios.strip of=linuxbios.rom bs=1 seek=`expr 65536 - $size`
65536
65536+0 Records ein
65536+0 Records aus
objcopy -O binary -R .note -R .comment -S /boot/vmlinux linux.bin
objcopy: /boot/vmlinux: File format not recognized
make: *** [linux.bin] Error 1
I got a linuxbios.rom and a linuxbios.strip, both 64kB. But somehow, I
think, the other 192kB of the Bios have to be filled with some
kernel-sources. I read something about kernel 2.4.10 and a patch, but I
can't find these instructions again. Then, if done, I think I have to
put the linuxbios.rom & the linux.bin together with the tool nrv2b. Am I
right?
Thanks again,
Tom
P.S. @Richard: I added this to the config-file (didn't know it should be
there): option SERIAL_SUPERIO_BASEADDRESS=0x3f0
Richard Smith wrote:
> Thomas Leidenfrost wrote:
>
>> ..cp linuxbios_payload.nrv2b linuxbios_payload
>> echo "INCLUDE ldoptions" > ldscript.ld ; for file in
>> /home/thomasle/freebios/src/arch/i386/config/ldscript.base
>> /home/thomasle/freebios/src/cpu/i386/entry16.lds
>> /home/thomasle/freebios/src/cpu/i386/entry32.lds
>> /home/thomasle/freebios/src/cpu/i386/reset16.lds ; do echo "INCLUDE
>> $file" >> ldscript.ld ; done
>> gcc -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o
>> crt0.o(.rom.text+0x7e): In function `__protected_start':
>> : undefined reference to `SERIAL_SUPERIO_BASEADDRESS'
>> crt0.o(.rom.text+0x8f): In function `__protected_start':
>> : undefined reference to `SERIAL_SUPERIO_BASEADDRESS'
>> crt0.o(.rom.text+0xa0): In function `__protected_start':
>> : undefined reference to `SERIAL_SUPERIO_BASEADDRESS'
>> crt0.o(.rom.text+0xb1): In function `__protected_start':
>> : undefined reference to `SERIAL_SUPERIO_BASEADDRESS'
>> crt0.o(.rom.text+0xc2): In function `__protected_start':
>> : undefined reference to `SERIAL_SUPERIO_BASEADDRESS'
>> crt0.o(.rom.text+0xd3): more undefined references to
>> `SERIAL_SUPERIO_BASEADDRESS' follow
>
>
> Looks like the boot up serial_setup is not right. crt0.s is built from
> files specified in your ./mainboard/Avantech/pcm-5823/Config
>
> the serial boot output stuff is built from this line.
>
> mainboardinit superio/SMC/fdc37b72x/setup_serial.inc
>
> Looking at the .inc for the advantech stuff and the config and some
> grepping I see that the superio base address is set with SMC_BASE in the
> pcm-5823 but set with SERIAL_SUPERIO_BASEADDRESS in the pcm-9574.
>
> What did you change this like to?
>
> Go look at whatever seteup_serial.inc you have and see what option it
> needs set for the serial base address.
>
> It may be as simple as adding a
>
> option SERIAL_SUPERIO_BASEADDRESS 0x<base>
>
> to your mainboard config file or you may have to make some
> setup_serial.inc mods for whatever superio you changed to.
--
Thomas Leidenfrost
Corscience GmbH & Co. KG
Henkestraße 91
91052 Erlangen
Tel: +49-9131-97798635
Fax: +49-9131-97798659
leidenfrost at corscience.de
More information about the coreboot
mailing list