Filo Error Help
YhLu at tyan.com
Tue Jul 13 14:15:01 CEST 2004
FILO in TWO CPU version LinuxBIOS works well S2885 in LANL and my lab.
So I still suggest that you get another CPU to verify the whole process.
From: David Aubin [mailto:daubin at actuality-systems.com]
Sent: Tuesday, July 13, 2004 12:40 PM
To: ron minnich
Cc: Takeshi Sone; YhLu; Hendricks David W.; LinuxBIOS
Subject: Re: Filo Error Help
That's interesting. Too small? Uncompressed it is:
ls -la :
8192000 2004-07-13 15:37 initrd
I have my ram disk set to 65536. I made it bigger just to be sure.
Are you saying the initrd and the ramdisk_size must be equal?
If so then this would explain why Yhlu's and my elf's did not work.
I'll try an exact ramdisk_size and initrd.
On Tue, 2004-07-13 at 15:27, ron minnich wrote:
On Tue, 13 Jul 2004, David Aubin wrote:
> Thank yo for the image, but oddly it fails exactly the
> same way....
> Found initrd block 0
> crc error
the few times I've seen the crc error is the initrd is configured too
small. I still think you might have a config problem here.
Put some debug prints in the initrd code and try to zoom in better to
what's going on.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot