Running with VGA

Sagiv Yefet sagivy at 3vium.com
Fri Dec 17 00:39:01 CET 2004


I try to build freebios2-20041216-0400
And I get this compilation error:
 
gcc -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o
/usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux
-gnu/bin/ld: section .reset [fffdfff0 -> fffdffff] overlaps section .rom
[fffd88c1 -> fffe0d7f]
/usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux
-gnu/bin/ld: section .id [fffdffd9 -> fffdffef] overlaps section .rom
[fffd88c1 -> fffe0d7f]
collect2: ld returned 1 exit status
make: *** [linuxbios] Error 1
 
What do you think it is?
 
Sagiv.
-----Original Message-----
From: YhLu [mailto:YhLu at tyan.com] 
Sent: Thursday, December 16, 2004 4:57 AM
To: Sagiv Yefet; linuxbios at clustermatic.org
Subject: RE: Running with VGA
 
I commit the changes for you. Please check it out from
 
http://snapshots.linuxbios.org/
 
one hour later.
 
YH
 
  _____  

From: Sagiv Yefet [mailto:sagivy at 3vium.com] 
Sent: Wednesday, December 15, 2004 12:09 AM
To: YhLu; linuxbios at clustermatic.org
Subject: RE: Running with VGA
 
I have this definition in targets/tyan/s2850/Config.lb:
option CONFIG_CONSOLE_BTEXT=1
Not default as you wrote.
Is it ok? 
 
Should I had the same thing in src/mainboard/tyan/s2850/Config.lb? 
 
Sagiv.
 
 
 
 
-----Original Message-----
From: Yinghai Lu [mailto:yhlu at tyan.com] 
Sent: Monday, December 13, 2004 4:01 AM
To: Sagiv Yefet; linuxbios at clustermatic.org
Subject: RE: Running with VGA
 
You need to add
 
uses CONFIG_CONSOLE_BTEXT
 
default CONFIG_CONSOLE_BTEXT=1
 
dir /drivers/ati/ragexl
 
after that you can get ouput in Linuxbios after vga init.
 
You also need to enable the btext in Etherboot. You should use Etherboot
5.2.6. it includes filo and btext console.
 
About kernel, you need to use kernel patch to enable ragexl frame buffer
support.
 
YH
 
  _____  

From: linuxbios-admin at clustermatic.org
[mailto:linuxbios-admin at clustermatic.org] On Behalf Of Sagiv Yefet
Sent: Sunday, December 12, 2004 5:23 AM
To: linuxbios at clustermatic.org
Subject: Running with VGA
 
Hello, 
            I am using Linux Bios on Tyan 2850. The machine is running
with console.
            I add to the command line: "console=ttyS0,115200" and I have
linux which runs with console.
            
How can I run with VGA? Should I add some code to the bios? 
 
            The VGA driver is: ATI Rage XL.
Sagiv
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20041217/c80b4294/attachment.html>


More information about the coreboot mailing list