EPIA-M build problem for freebios2

[ron minnich]

On Fri, 27 Aug 2004, Dan Sully wrote:

> So first of all, it's not clear from any of the outdated documentation
> whether one should be using freebios or freebios2.

oh well :-)

> 
> So, I'm jumping in and trying to use 2 - but getting this error:
> 
> ar cr linuxbios.a  malloc.o apic_timer.o pci_ops.o vt8235.o chip.o memset.o fallback_boot.o keyboard.o cpuid.o pnp_device.o printk.o irq_tables.o pgtbl.o tables.o pci_device.o console.o cpufixup.o elfboot.o hardwaremain.o boot.o linuxbios_table.o delay.o version.o memcmp.o isa-dma.o hypertransport.o vtxprintf.o root_device.o mtrr.o uart8250.o device_util.o ./option_table.o compute_ip_checksum.o device.o memcpy.o northbridge.o clog2.o pirq_routing.o memmove.o mc146818rtc.o rom_stream.o c_start.o vsprintf.o cpu.o static.o
> gcc -nostdlib -r -o linuxbios_c.o c_start.o  mainboard.o uart8250_console.o linuxbios.a /usr/lib/gcc-lib/i486-linux/3.3.4/libgcc.a
> gcc -nostdlib -nostartfiles -static -o linuxbios_c -T /home/dsully/src/freebios2/src/config/linuxbios_c.ld linuxbios_c.o
> linuxbios_c.o(.data+0x1e4): undefined reference to `mainboard_via_epia_m_control'
> collect2: ld returned 1 exit status
> make: *** [linuxbios_c] Error 1
> 
> targets/via/epia-m/epia-m/normal/static.c

arg. 

I'll try to look at this monday unless somebody beats me to it.

ron