stopped at "jumping_to_bootcode" @ GEODE SC1200

[Hendricks David W.]

Can you please specify the command line you are using for your payload?

On Mon, 9 Aug 2004, [ks_c_5601-1987] ¹Ú¿µ¿ì wrote:

> Hi there,
> 
> We are developing LinuxBIOS upon GEODE SC1200 (from AMD)
> 
> We want to boot Linux image from IDE 
> Currently, we have completed the BIOS configuration & could be booting with that configuration
> 
> I think that it's done to read the compressed image from IDE(0x7e00) to memory(0x100000)
> But We could not load linux image(stopped at "jumping_to_bootcode" , which LinuxBIOS printed)
> 
> What can we do?
> 
> Any help or point to the help will be appreciated
> 
> Regards
> 
> pywha
> 
> 
> 
> 
> 
> 
> 
> 

-- 
***** DUSA LACSI-HW *****