stopped at "jumping_to_bootcode" @ GEODE SC1200

[박영우]

Hi there,

We are developing LinuxBIOS upon GEODE SC1200 (from AMD)

We want to boot Linux image from IDE 
Currently, we have completed the BIOS configuration & could be booting with that configuration

I think that it's done to read the compressed image from IDE(0x7e00) to memory(0x100000)
But We could not load linux image(stopped at "jumping_to_bootcode" , which LinuxBIOS printed)

What can we do?

Any help or point to the help will be appreciated

Regards

pywha







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20040809/ed39f478/attachment.html>