tyan s2880 build broken?

YhLu YhLu at tyan.com
Mon Apr 26 12:19:24 CEST 2004

I will change the code to disable the lsi_scsi as the default.
Do you have lsi 1030 onboard?  You need to use it? 
If you need to use it, I send you pre-built image, because I can not publish
the source code of lsi_scsi. LSI don’t want to.

发件人: HC Wang [mailto:hcwang at netd.com] 
发送时间: 2004年4月26日 10:15
收件人: linuxbios at clustermatic.org
主题: tyan s2880 build broken?
I checked out linuxbios2 tree from sourceforge.net, and I have problem with
building bios for tyan s2880 motherboard, here is the error message from
buildtarget tyan/s2880:
Configuring PART mainboard, path tyan/s2880
===> NOTE: Changing default value of LB_CKS_RANGE_START
===> NOTE: Changing default value of LB_CKS_RANGE_END
===> NOTE: Changing default value of LB_CKS_LOC
Configuring DIR ../common/lsi_scsi/Config.lb
===> ERROR: Could not open file
[hcwang at primary targets]$ pwd
Has anybody experience similar problem?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20040426/b7c1668d/attachment.html>

More information about the coreboot mailing list