ATI rage xl.init
Stefan Reinauer
stepan at openbios.org
Sat Apr 24 18:04:00 CEST 2004
Yinghai,
> Please commit ati rage xl support.
>
> 1. ati rage xl support
> 2. add btext_console to use rage xl fb.
> 3. enable pnp init calling
> 4. superio Winbond: real enable/disable device.
> 5. superio Winbond: enable HW
> 6. Tyan S2850 support update
> 7. Tyan S2875 support added.
> 8. Move some PCI master enable driver to /driver dir.
I merged most of the missing stuff now.
I had rejects in the following files, thus I did not touch them.
Please resend a working diff against the next snapshot that appears.
src/mainboard/tyan/s2882/Config.lb
src/mainboard/tyan/s2885/Config.lb
src/superio/winbond/w83627hf/superio.c
src/superio/winbond/w83627hf/w83627hf_early_serial.c
Also, do these two files belong in the ATI driver directory?
ati/ragexl/fb.h
ati/ragexl/fbcon.h
Can they go somewhere generic? Let's try to reuse as
much of the code as possible.
src/include/pc80/btext.h: I've put this to console/btext.h since the
btext console code lives in console/, not in pc80/
Stefan
More information about the coreboot
mailing list