config tool + tree enumeration

[Alan Mimms]

Hello Lu,

Is there anything in CVS yet for K8 CPU support?  I didn't see anything a week or so ago.  The AMD folks say it's there and "production level".

?

Thanks.

Alan Mimms, Senior Architect
F5 Networks, Inc.  Spokane Development Center
Liberty Lake, Washington
v: 509-343-3524   f: 509-343-3501


-----Original Message-----
From: YhLu [mailto:YhLu at tyan.com] 
Sent: Monday, September 29, 2003 10:06 AM
To: ron minnich
Cc: Stefan Reinauer; Eric W. Biederman; linuxbios at clustermatic.org
Subject: Re: config tool + tree enumeration

Ron,

In s2880, If I don't change the 0 to 1. I will get two copy of bus1 devices
in the Linux. In S2885, it is OK, if I don't change it.

In Arima, You still can not see bus1 device now?

Regards

Yinghai Lu

-----邮件原件-----
发件人: ron minnich [mailto:rminnich at lanl.gov] 
发送时间: 2003年9月29日 10:00
收件人: YhLu
抄送: Stefan Reinauer; Eric W. Biederman; linuxbios at clustermatic.org
主题: Re: config tool + tree enumeration

On Mon, 29 Sep 2003, YhLu wrote:

> Stefan,
> 
> >It's bus 1, that LinuxBIOS and OpenBIOS
> >find really well, only Linux refuses to see it.
> 
> Do you update the irq_table.c's interrupt router bus no. from to "0" to
"1"?

that's not the problem. The problem is that linux does not see bus 1 at 
all.

ron
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios