config tool + tree enumeration
YhLu
YhLu at tyan.com
Mon Sep 29 12:16:01 CEST 2003
Stefan,
>It's bus 1, that LinuxBIOS and OpenBIOS
>find really well, only Linux refuses to see it.
Do you update the irq_table.c's interrupt router bus no. from to "0" to "1"?
Regards
YH.
-----邮件原件-----
发件人: Stefan Reinauer [mailto:stepan at suse.de]
发送时间: 2003年9月29日 2:18
收件人: Eric W. Biederman
抄送: ron minnich; YhLu; linuxbios at clustermatic.org
主题: Re: config tool + tree enumeration
* Eric W. Biederman <ebiederman at lnxi.com> [030929 00:38]:
> And until I have a reason I don't see the point, in making
> a change.
Hm. You are right. With some more tests I found out that this
solution only fixes the problem occasionally. It seems that
the chance that it works is higher with the number of tries.
Really weird.
> Mostly I suspect this is a matter of keeping the irq tables
> in sync, or something similar where hard codes don't match the dynamic
> assignments. And if that is the case we need to dig and do a good fix
> instead of papering over the problem.
If LinuxBIOS hangs during CPU/Northbridge enumeration, can this
really be a matter of irq tables? I thought that they are touched
quite a while later in the setup process.
I suspect it might be connected to the highest bus number set in
the default resource map, but I did not try more in this direction
yet.
Additionally I have Linux moaning that the irq table contains entries
for a bus that does not exist. It's bus 1, that LinuxBIOS and OpenBIOS
find really well, only Linux refuses to see it.
Stefan
--
Architecture Team
SuSE Linux AG
More information about the coreboot
mailing list