LinuxBios + EPIA5000 + Win2k Bootloader + HD + VGA

[SONE Takeshi]

On Wed, Sep 17, 2003 at 12:26:33AM +0200, Sven Lübke wrote:
> I want to install LinuxBIOS on my EPIA5000 in combination with
> an IDE-Harddisk. The harddisk contains a Win2k bootloader
> which boots LiLo or Win2k. The VGA port on the EPIA board should
> be enabled! Is that combination possible/up-to-date at all? Which
> setup has the fastest boottime?

I would rather use a BIOS Saviour to switch between
LinuxBIOS (fast linux-only boot) and the factory BIOS (compatible boot).
ADLO is not stable yet and the legacy boot loaders are slow anyway.

--
Takeshi