EPIA-M 10000 etherboot
dhroepaem at freechal.com
dhroepaem at freechal.com
Fri Sep 12 22:30:01 CEST 2003
thanks, ron
now i have four questions.
first,
i modified the config file.
now linuxbios does not run correctly, but it shows more messages.
when load the linuxbios directly, the message is
?
xxxxxxxfx~ffxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxffxf
when load the linuxbios after doing original bios, the message is
linuxbios-1.0.0 2003. 09. 09. (ȭ) 16:04:55 kst starting...
dump device: 00000000
00: 06 11 23 31 06 00 30 02 00 00 00 06 00 00 00 00
10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00
40: 00 18 88 80 82 44 00 00 18 99 88 80 82 44 00 00
50: e0 00 00 02 c0 04 00 00 22 00 01 01 01 01 00 00
60: 00 00 00 00 e4 00 00 2a 00 00 00 00 00 00 00 00
70: 00 48 00 00 01 00 00 00 01 00 00 00 00 00 02 00
80: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 01 02 00 1f 00 00 00 00 00 02 00 00
b0: 00 00 00 00 c0 00 00 00 aa 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 01 00 40 00 00 00 00 00 00 00.............................= 11
f0: 00 00 00 00 00 00 03 13 00 00 00 00 00 00 00 00
....................................
done......
dump device: 00008800...........0001c60 -
00: 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00............................ef] ioup) new segment a
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
..........................................
40: 00 80 00 00 00 00 00 00 0c 20 00 00 04 00 00 00000 - 0x000010ff] io
50: 09 1d 00 00 00 00 00 00 20 00 00 01 00 00 00 00
...................
60: 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00.........cmd
.................................................
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00-07- 00000674 ch
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00ader class!
pci devices i
d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
data=0009884e
firmware t
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00m
linux version 2.4.18 (root at epiam) (
f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00
done.
dump device: 00008900cache...
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffios-e820: 00000000000006d4 - 00000000000a0000 (us
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffnuxbios_c.o(.te
inode-cache hash
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
un
mount-cache hash table entries: 2048 (or
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<sleep>
<
re
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffr-cache hash table entries: 4096 (order: 2, 16384 b
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
checking 'hlt' instruction... ok.:11
done.
dump device: 00000000
check
00: 06 11 23 31 06 00 30 22 00 00 00 06 00 00 00 00
apnp enabled cmd <- 07
tty
10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00k or from (l)ocal? cl
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00: 128 slots per queue, batch=320:01.0 1c <- [
80: 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00rt>
boot fr
vp_ide: not 100% native m
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
probing...[via 86c100]fou
a0: 02 c0 20 00 01 02 00 1f 00 00 00 00 00 02 00 00bm-dma at 0x18e0-0x18e7, bios settings: hda:pio, hd
b0: 00 00 00 00 c0 00 00 00 aa 00 00 00 00 00 00 00
io address 1400 ethernet addres
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
analyzing media type,this
40: 45 7f f0 00 00 00 00 00 0c 20 00 00 44 00 0b 08 you might want to try agp_tr
50: 81 1d 09 00 00 b0 ac 50 23 00 00 00 00 00 00 00
linespeed=100mbs fullduplex
usb.c: new usb bus registered, assign
90: 00 f1 60 88 a0 c0 00 00 00 20 00 00 00 00 00 00
pci: 00:01.0 [1106/b
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0009. (ȭ) 16:04:55 kst starting...
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.0 [1106/3038]
dump device:
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 23 31 06 00 30 02 00 00 00 06 00 00 00 00
d0: 01 05 01 00 00 00 00 00 00 00 00 00 00 00 00 000.3 [1106/3104]
10: 08 00 0
e0: 00 00 00 00 14 08 00 00 00 00 00 00 00 00 00 00
pci: 00:11.
f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 0 00 00 00 00 00
40: 0b f2 00 05 18 1c c0 00 a8 a8 a8 20 ff 00 b6 b600 00 00 eaffff
50: 07 07 07 07 0c 03 00 00 a8 a8 a8 a8 00 00 00 00
00: 06 11 77 31 87 00 10 0
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00io
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 000 00 00 00 00 00 00 00 00 00 0018c0 - 0x000018df] i
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 0
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00: 00:01.0 cmd <- 07
p
80: 00
d0: 06 00 71 05 00 00 00 00 00 00 00 00 00 00 00 00d <- 01
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000: 00 f1 60 00 b0 c0 00 00 10 20 00 00 00 00 00 001
f0: 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 00
pci: 00:10.3 cmd <- 02
a0: 0
done.0 00
copying linuxbios to ram. 00 00 00
jumping to linuxbios.
pci: 00
linuxbios-1.0.0 2003. 09. 09. (ȭ) 16:04:55 kst booting... 00 00 00 00 00 00 00 00 00 00i: 00:12.0 cmd <- 83
finding pci configuration type.
pci: 00:0d.0 [1106/3044]
e0: 00 00 00 0
pci: 00:10.0 [1106/3038] 00 00 00 00
pci: 00:10.1 [1106/3038]
setting f
pci: 00:10.2 [1106/3038]
pci: 00:10.3 [1106/3104]0 05 00 00 00 00 00 00 0
pci: 00:11.0 [1106/3177]
pci: 00:11.1 [1106/0571] ff ff ff ff ff ff ff ff
pci: 00:11.5 [1106/3059]
pci: 00:12.0 [1106/3065]or type : 0x00
pci: pci_scan_bus for bus 1f ff ff ff ff ff ff ff ff f
pci: pci_scan_bus returning with max=01
initia
pci: pci_scan_bus returning with max=01
b0:
donef ff
allocating pci resources...ff ff ff ff
fix
d
pci: 00:00.0 register 10(00000008), read-only ignoring itenabled
pci: 00:00.0 register 10(00000008), read-only ignoring it ff ff ff ff ff ff ff ff ff ff ff ff ff initialized
assign resources, bus 0
pci: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff f
pci: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmemthbridge fixup
cpu #0 in
setting
pci: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem0 to 0:d.0 112mb, ra
pci: 00:0d.0 10 <- [0xfeb00000 - 0xfeb007ff] mem00 00 00 00ng usb
pci: 00:0d.0 14 <- [0x00001800 - 0x0000187f] irq 11 to 0:10.0
rom s
pci: 00:12.0 10 <- [0x00001400 - 0x000014ff] io 00
pci: 00:12.0 14 <- [0xfeb02000 - 0xfeb020ff] mem
80: 20 84 59 00 f2 70 00 00 01 04 00 00 00
assigned resources, bus 0
done.
et
enabling pci resourcess...pci: 00:00.0 cmd <- 06 from (n)etwork o
90: 00 f1
pci: 00:01.0 cmd <- 070 00 00 00 00 00 00
pci: 00:0d.0 cmd <- 07
pci: 00:12.0 cmd <- 07 00 00 00 00 00ec
done.
initializing pci devices...
io address 1400 e
pci devices initialized3
totalram: 127m
c0: 01 0
initializing cpu #000 00 00 00 00 00 0
enabling cache...
setting fixed mtrrs(0-88) type: uca type,this will take severa
setting fixed mtrrs(0-16) type: wb
d0: 01 05 01 00 00 00 00 00 00 0
done fixed mtrrs0090 via lane3):
setting variable mtrr 0, base: 0mb, range: 64mb, type wb
linespeed=100mbs fulld
setting variable mtrr 1, base: 64mb, range: 32mb, type wb00 not enabled thisrtc i
setting variable mtrr 5, base: 124mb, range: 2mb, type wb
c0: 01 00 02
done variable mtrrs 00 00 00 00 00 00
clear out the extra mtrr's
ju
call intel_enable_fixed_mtrr()
unknown
d0: 06
call intel_enable_var_mtrr()0 00 00 00 00 000000us 00 pc
leave setup_mtrrs
done.
max cpuid index : 1
data=0009884ences
vendor id : centaurhauls
firmwa
e0: 00 00 00 00 00
processor type : 0x00 00 00sion 2.4.18 (root at e
processor family : 0x06
processor model : 0x08
fixed mtrrs : enabled
variable mtrrs: enabled-provided physical r
disabling local apic...done.
linuxbios-1.0.0 20
cpu #0 initialized:04:55 kst
mainboard fixup
final mainboard fixup_bus
southbridge fixup6/3044]0
setting firewirehm, page 0000000
assigning irq 12 to 0:d.0
pci: 00:10.0 [1106/303
readback = 12
sear
setting usb
assigning irq 11 to 0:10.0/3038]urning with max=01oc
readback = 11
assigning irq 12 to 0:10.100:10.2 [1106/3038]
readback = 12
zone(1
assigning irq 10 to 0:10.2
readback = 10
pci:
assigning irq 5 to 0:10.3ommand line: conso
readback = 5
setting ethernet 00:11.1 [1106/0
assigning irq 11 t
calibrating
pci: pci_scan_bus returning with max=0
able() - irq_routing_table located at: 0x000090000.2 cmd <- 0107.
memor
done.i: pc
copying irq routing tables to 0xf0000...done. reserved,0:10.3 cmd <- 0
verifing priq routing tables copy at 0xf0000...failed
done00:0
allocating pci resourc
wrote linuxbios table at: 00000500 - 00000664 checksum 4050 [0xfeb01000 - 0xfeb010ff] mempci: probing pci hardware
welcome to elfboot, the open sourced starter.
pci: 00:11.1 20 <- [0x0
january 2002, eric biederman.ci: 00:01.0 24 <- [0xfeb00000
version 1.2
ven
linux n
done.for l
enabling pci resource
000000000037e0.0 cmd <- 06ns
clearing segment: addr: 0x00000000000977e0 memsz: 0x0000000000003b48
pci: 00:
jumping to boot code at 0x9400001
rom segment 0x0000 length 0x0000 reloc 0x9400 pci_scan_
etherboot 5.0.8 (gpl) tagged
analyzing media type,this will take several seconds........okbus sp
initializing cpu #0verride
linespeed=100mbs fullduplex
enab
searching for server (dhcp)...setting fixed mtrrs(0-88) type
..me: 192.168.1.102, server: 203.252.137.169
vp_ide: ide controller on
loading 203.252.137.169:/vmlinuz.epiam ...(elf)... .............................
i think that the 2th message and the 1th message are same
but output type(?) is different. (correct? ㅡ.,ㅡ;)
i will be waitting for your advices :)
second,
after loading the linux kernel, the booting stops with a following message.
...
linux kernel card services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
uhci.c: usb universal host controller interface driver v1.1
uhci.c: usb uhci at i/o 0x1880, irq 11
usb.c: new usb bus registered, assigned bus number 1
i don't know why the booting stops here.
third,
what is the post card?
post = power on self test?
if it does, how can i check the post card?
fourth,
what does [pmx:##] mean? :)
have a nice day~
DDR보다 신난다! 온라인으로 즐기는 3D아바타 댄싱 게임
http://showtime2.freechal.com/index.asp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030912/fa05c616/attachment.html>
More information about the coreboot
mailing list