about etherboot and mkelfImage

rimy2000 rimy2000 at hotmail.com
Fri Sep 5 23:40:01 CEST 2003


Thanks!  I am so careless and after I changed console=/dev/ttyS0  to  console=ttyS0 it works fine now.


----- Original Message ----- 
From: "Adam Agnew" <agnew at cs.umd.edu>
To: "rimy2000" <rimy2000 at hotmail.com>
Cc: <linuxbios at clustermatic.org>
Sent: Saturday, September 06, 2003 11:48 AM
Subject: Re: about etherboot and mkelfImage


> Nope, not "console=/dev/ttyS0,115200n8" you want "console=ttyS0,115200n8"
> (or you can leave out the n8). Give that a shot. But first, as the last
> mail said, test it under a normal bios (with the same command line!).
> 
> 
> On Sat, 6 Sep 2003, rimy2000 wrote:
> 
> > Yes, I put.
> >
> > ./mkelfImage --kernel=/mnt/root/bzImage-17 --output=vmlinuz.vo --command-line="c
> > onsole=/dev/ttyS0,115200n8 root=/dev/hda2"
> >
> >
> > ----- Original Message -----
> > From: "Adam Agnew" <agnew at cs.umd.edu>
> > To: "rimy2000" <rimy2000 at hotmail.com>
> > Cc: <linuxbios at clustermatic.org>
> > Sent: Saturday, September 06, 2003 11:38 AM
> > Subject: Re: about etherboot and mkelfImage
> >
> >
> > >
> > > Did you put this on your command like "console=ttyS0,115200" (change
> > > 115200 for the baud you were using linuxbios at)?
> > >
> > > On Sat, 6 Sep 2003, rimy2000 wrote:
> > >
> > > > After I upgrade binutils to 2.14, mkelfImage 2.5 work find and the new output is
> > > >
> > > > Loading 172.27.4.23:vmlinuz.vo ...(ELF)... .......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done
> > > >
> > > > rhine disable
> > > >
> > > > Firmware type: LinuxBIOS
> > > >
> > > > but then I received nothing from serial.
> > > >
> > > > Any hint?
> > > >
> > > > Thanks!ÿ
> > > >
> > > > _______________________________________________
> > > > Linuxbios mailing list
> > > > Linuxbios at clustermatic.org
> > > > http://www.clustermatic.org/mailman/listinfo/linuxbios
> > > >
> > >
> > > _______________________________________________
> > > Linuxbios mailing list
> > > Linuxbios at clustermatic.org
> > > http://www.clustermatic.org/mailman/listinfo/linuxbios
> > >
> >
> >
> 
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
> 



More information about the coreboot mailing list