about etherboot and mkelfImage
YhLu
YhLu at tyan.com
Fri Sep 5 23:17:00 CEST 2003
1. You need to verify your Kernel is workable under Normal BIOS.
2. when you using mkelfimage, you need add parameters for Console port and
baud rate.
YH.
-----邮件原件-----
发件人: rimy2000 [mailto:rimy2000 at hotmail.com]
发送时间: 2003年9月5日 20:24
收件人: linuxbios at clustermatic.org
主题: Re: about etherboot and mkelfImage
After I upgrade binutils to 2.14, mkelfImage 2.5 work find and the new
output is
Loading 172.27.4.23:vmlinuz.vo ...(ELF)...
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
.......................................................................done
rhine disable
Firmware type: LinuxBIOS
but then I received nothing from serial.
Any hint?
Thanks!
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list