HDAMA errors during PCI scan

[Craig C Forney]

I wanted get up to date with the latest code developments with Linuxbios
on the HDAMA board.  I downloaded the current source tree from
sourceforge this morning.  The build went just fine.  However, it gets
stuck during initialization.  The only code change I made to the latest
version was to change the PAYLOAD to FILO 0.4.  (The version from a few
weeks ago makes, compiles, and boots Linux using FILO 0.3.)

I'm guessing that there is some configuration change needed for HDAMA.
Any thoughts?

-- Craig Forney, Opus Innovations LLC

Latest version (not working):

Copying LinuxBIOS to ram.
003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8
Enumerating: AMD K8
Enumerating: AMD 8111
Enumerating: NSC 87360
Enumerating buses...PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [ffff/ffff] enabled
PCI: 00:19.1 [ffff/ffff/00ffff] has unknown header type ff, ignoring.
PCI: 00:19.1 No device operations
PCI: 00:19.2 [ffff/ffff/00ffff] has unknown header type ff, ignoring.
PCI: 00:19.2 No device operations
PCI: 00:19.3 [ffff/ffff/00ffff] has unknown header type ff, ignoring.
PCI: 00:19.3 No device operations
amdk8_scan_chains max: 0 starting...

Earlier version (working):

LinuxBIOS-1.1.4.0Fallback Thu Oct 9 03:02:57 PDT 2003 starting...
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.4.0Fallback Thu Oct 9 03:02:57 PDT 2003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8
Enumerating: AMD K8
Enumerating: NSC 87360
Enumerating buses...PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] ops
PCI: 00:19.3 [1022/1103] enabled
amdk8_scan_chains max: 0 starting...
Hyper transport scan link: 0 max: 1
PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003
PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007
HyperT reset needed