AMD8151

[Stefan Reinauer]

Hi,

I still don't get the 8151 to work properly on the solo board.

i believe that the link setup looks like:

           Athlon64
              |
            8151
              |
            8111

since athlon64 has only one ht link.

my config.lb defines:
northbridge amd/amdk8 "mc0"
        southbridge amd/amd8151 "amd8151" link 0
        end
        southbridge amd/amd8111 "amd8111" link [1|2]
        end
end

What is the right way of describing how the 8111 is connected in the
config?

And I only get hangs at:
NB: Function 3 Misc Control.. 

IF I set amd8111 link to 0 I get a reboot plus hang at
PCI: 03:00.2 [ffff/ffff] disabled                                               
amd8111_enable dev: PCI: 03:01.0 lpc_dev: PCI: 01:05.0 index: 9 reg:
fe9f -> fce
PCI: 03:01.0 [ffff/ffff] disabled                                               
PCI: 03:05.0 [14e4/1645] enabled                                                
Copying LinuxBIOS to ram.                                                       
Jumping to LinuxBIOS.                                                           
LinuxBIOS-1.1.5.0-Fallback Mo Okt 20 11:35:43 CEST 2003 rebooting...            


I also noticed that not all elements in the capability linked list
of the 8151 are HT capabilities. The first one on 8151 is an AGP
capability element. Maybe this explains why a different ordered probing
is needed, does LinuxBIOS correctly skip AGP capability blocks?

Stefan

-- 
ARCHITECTURE TEAM
    SUSE LINUX AG