[COMMIT] freebios2 How much have I broken?
YhLu
YhLu at tyan.com
Mon Oct 13 22:55:01 CEST 2003
Eric,
The same.
One Clue: Even I do the reverse scan, if I enable the hard_reset in the
misc_control.c. After the reset and successful scan the 8131/8111, it will
hang when scan the 8151.
Regards
YH
-----邮件原件-----
发件人: YhLu
发送时间: 2003年10月13日 20:00
收件人: ebiederman at lnxi.com
抄送: LinuxBIOS
主题: Re: [COMMIT] freebios2 How much have I broken?
One minute.
-----邮件原件-----
发件人: ebiederman at lnxi.com [mailto:ebiederman at lnxi.com]
发送时间: 2003年10月13日 20:07
收件人: YhLu
抄送: LinuxBIOS
主题: Re: 答复: [COMMIT] freebios2 How much have I broken?
YhLu <YhLu at tyan.com> writes:
> I think Stephan will have trouble on it too.
>
> For me, If I reverse scan in northbridge.c, and it will be OK.
A) the reverse scan works and that is good.
> It seems that 8131/8111 need to initialize before others.
Why? This is what I am trying to understand. It doesn't make sense
especially as I already did that, earlier. The resets to get the
hypertransport settings to take effect. I can see those depending on
the amd8111.
Have you tried the small subroutine change I sent?
Eric
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list