K8 MTRR reboot on Solo
steven james
pyro at linuxlabs.com
Mon Oct 6 12:31:01 CEST 2003
Greetings,
Is the cross cable fully wired for Gig ether? I've seen a lot of cables
where only 2 pairs are crossed and the rest wired direct, and I've seen
Gig ether NICs get terribly confused by that.
G'day,
sjames
On Mon, 6 Oct 2003, Stefan Reinauer wrote:
> * Stefan Reinauer <stepan at suse.de> [031006 14:13]:
>
> the card is connected with a cross cable to a HDAMA..
>
> etherboot 5.3.1:
>
> > [tg3-5701]Ethernet addr: 00:04:76:F3:A9:CE
> > Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit)
> > Link is up at 1000 Mbps, full duplex. TX RX flow control
> > Searching for server (DHCP)...
> > ..UDP checksum error
> > .UDP checksum error
> > .UDP checksum error
> > ..Me: 192.168.0.20, Server: 192.168.0.23
> > Loading 192.168.0.23:legacybios ...
> > <takes forever>
>
> etherboot 5.3.2:
> Etherboot 5.3.2 (GPL) http://etherboot.org Tagged ELF for [TG3][IDE]
> Relocating _text from: [000264d0,00058500) to [0fecdfd0,0ff00000)
> .ÿProbing pci nic...or (Q)uit?
> [tg3-5701]Ethernet addr: 00:04:76:F3:A9:CE
> Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit)
> Link is up at 1000 Mbps, full duplex. TX RX flow control
> Searching for server (DHCP)...
> ..transmit timed out
> tg3_stop_block timed out, ofs=00003c00 enable_bit=00000002
> .<abort>
>
> etherboot 5.2.2 seems to be the same as 5.2.0
>
>
>
> Best regards,
> Stefan Reinauer
>
>
--
-------------------------steven james, director of research, linux labs
... ........ ..... .... 230 peachtree st nw ste 2701
the original linux labs atlanta.ga.us 30303
-since 1995 http://www.linuxlabs.com
office 404.577.7747 fax 404.577.7743
-----------------------------------------------------------------------
More information about the coreboot
mailing list