V2 VIA EPIA

[ron minnich]

On Wed, 1 Oct 2003, Andrew Ip wrote:

> I'm able to build and run LinuxBIOS on EPIA with some treaking on Config.lb.

send me the tweaks, although they should not have been needed.


> However, it fails to jump to payload(etherboot).  I suspect LinuxBIOS is
> jumping to a wrong location.  Is it possible to set ZKERNEL_START in v2?

ZKERNEL_START is not really needed any more. I don't think. Am I wrong?

> BTW, ROM_SIZE for default setup should be 262144 instead of 512k, since
> most EPIA doesn't come with 512k flash.

OK, I will try to commit that tomorrow.

please send me output.

ron