SST39SF040

[Xavier Pegenaute]

Hi,

> did you build a 512K image or just a 256K image? this is a common mistake.

I'm not so sure but i think that I made it fine. But i have some questions:

-------------------------------------------------------------------

#
# LinuxBIOS config file for: VIA epia mini-itx
#

# via epia
mainboard via/epia-m

# Enable Serial Console for debugging
option SERIAL_CONSOLE=1
option TTYS0_BAUD=115200
option DEFAULT_CONSOLE_LOGLEVEL=9
option DEBUG=1

# Use 256KB Standard Flash as Normal BIOS
option RAMTEST=1
option USE_GENERIC_ROM=1
option STD_FLASH=1
#option ZKERNEL_START=0xfffc0000
#option ROM_SIZE=262144
option ROM_SIZE=524288

# payload size = 192KB
#option PAYLOAD_SIZE=196608
#option PAYLOAD_SIZE=458752 <-- I thougt that was this value because 
                            <-- 256K - 64K = 196608.
option PAYLOAD_SIZE=1      <-- I tried also with this because is the
                           <-- parameter "bs" of "dd". With the other
                           <-- one the size of romimage was too big.

# use ELF Loader to load Etherboot
option USE_ELF_BOOT=1

# Use Etherboot as our payload
#payload /home/xavi/via-rhine.elf
payload /home/xavi/filo-0.4.1/filo.elf
#payload /bzImage.elf

target /home/xavi/epia-m
------------------------------------------------------------

Is there some better manual for the actual options of "freebios" than
"configmanual.ps"  think this is too old ?

Xavi.