After make the linuxbios.rom

Serafino Sorrenti s.sorrenti at regia.tv
Tue May 13 10:45:00 CEST 2003


After make the linuxbios.rom with this config file i don't see any log in the 
serial ports, and the monitor is out of signal.

tnx 
Serafino


# Sample config file for PCCHIPS M810LMR with DoC Millennium (as root)
# This will make a target directory of ./pcchips
target pcchips

# PCCHIPS M810LMR mainboard
mainboard pcchips/m810lmr

# We are using a k7 cpu (???)
cpu k7

# Set up udelay - needed
option CONFIG_UDELAY_TSC=1

# This SHOULD enable the video console with messages about what's going on
#option VIDEO_CONSOLE=1

# Enable Serial Console for debugging
option SERIAL_CONSOLE=1

# Sets the log level, from 9 to 1 (???)
option DEFAULT_CONSOLE_LOGLEVEL=6

# More debug options
option SERIAL_POST=1

# Enables ethernet (?)
option ENABLE_MII=1

# use DOC MIL
option USE_DOC_MIL=1
docipl northsouthbridge/sis/730/ipl.S

# Use the internal VGA frame buffer device
option HAVE_FRAMEBUFFER=1

# Sets the amount of framebuffer memory
# 0x80 (2MB/4MB)
# 0x90 (4MB/8MB)
# 0xA0 (8MB/16MB)
# 0xB0 (16MB/32MB)
# 0xC0 (32MB/64MB)
# 0xD0 (64MB/na)
option SMA_SIZE=0xC0

# Enables IDE boot
option BOOT_IDE=1

# Selects which IDE device should boot from, using the following table:
# /dev/hda -> 0
# /dev/hdb -> 1
# /dev/hdc -> 2
# /dev/hdd -> 3
option IDE_BOOT_DRIVE=0

payload /home/fino/ide_disk.zelf

# Partition table size (should be left untouched?)
option ONE_TRACK=32

# Need to "relocate the gdt" to use a standard flash part (???)
biosbase 0xffff0000

# Path to your kernel (vmlinux)
linux /usr/src/linux

# Kernel command line parameters
commandline root=/dev/hda1 console=ttyS0,115200 console=tty0 single




More information about the coreboot mailing list