PCI bus error on VT6102 ethernet

Ronald G. Minnich rminnich at lanl.gov
Wed Mar 26 08:31:01 CET 2003

On Wed, 26 Mar 2003 hcyun at etri.re.kr wrote:

> When I tried to enable vt6102 ethernet, i got following error.  After
> tracking down the code, I found that it happen because ISR0 (0xc)
> register report "PCI Bus error".

Was ISR0 set to the value beforehand? Is it possible that the driver 
should be doing more to reset the hardware than it does? 


More information about the coreboot mailing list