Config file/Rom image to Jetway B860t

[Ivan Gustavo]

SONE Takeshi wrote:

>On Sat, Mar 22, 2003 at 10:13:24PM +0300, Alexander Amelkin wrote:
>  
>
>>Hello Ronald,
>>
>>Saturday, March 22, 2003, 1:21:12 AM, you wrote:
>>
>>RGM> On Fri, 21 Mar 2003, Ivan Gustavo wrote:
>>
>>    
>>
>>>>Now is the problem, I do not know what file I need to use to write on my 
>>>>BIOS, the romfile have up to 900k, and my  eeprom is 256k like many 
>>>>others...
>>>>        
>>>>
>>RGM> for that small part you can not use a linux kernel, you will have to use 
>>RGM> etherboot. But etherboot works extremely well.
>>
>>Isn't it possible with EPIA to boot from a local IDE drive like with
>>m787cl+ ?
>>    
>>
>
>Yes, it is possible.
>My EPIA successfully boots with BOOT_IDE.
>Now I'm trying to enable all RAM (now it's hardcoded to 64M),
>and get video.
>The only problem so far is that verify_loaded_image (elfboot.c)
>hangs up after loading kernel from IDE.
>I have not yet investigated this one but commented out that call
>and it's working ok.
>
>--
>Takeshi
>

I am working on the development of the some other hardware support for 
the B860T M/B which I guess is full usable for the Epia, I must do only 
some bugfix for the RGB encoder V1621 to TV Out, and will test for us .

>  
>


-- 
Ivan Gustavo Munix dos Santos
-----------------------------
http://www.munix.com.br
mailto:ivan at munix.com.br
Skydental SJC.
Av. Heitor Vila lobos, 1565
Fone: 12-39232925 Ramal 215
Sao Jose Dos Campos - SP