[epia]Unknown bootloader class

Tue Mar 18 19:06:01 CET 2003

I have epia board. I had followed the HOWTO/EPIA Documentation.
But The debug messages are like this below.
What's wrong?  I use a ROM Emulator.
And I  use mkelfImage from freebios/util/mkelfImage/.
Please, Help me!!
=====================================================
LinuxBIOS-1.0.0 Tue Mar 18 21:45:13 KST 2003 starting...
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.0.0 Tue Mar 18 21:45:13 KST 2003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Scanning PCI bus...PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1106/0601]
PCI: 00:01.0 [1106/8601]
PCI: 00:11.0 [1106/8231]
PCI: 00:11.1 [1106/0571]
PCI: 00:11.2 [1106/3038]
PCI: 00:11.3 [1106/3038]
PCI: 00:11.4 [1106/8235]
PCI: 00:11.5 [1106/3058]
PCI: 00:11.6 [1106/3068]
PCI: 00:12.0 [1106/3065]
PCI: pci_scan_bus for bus 1
PCI: pci_scan_bus returning with max=01
PCI: pci_scan_bus returning with max=01
done
Allocating PCI resources...
PCI: 00:00.0 register 10(00000008), read-only ignoring it
PCI: 00:00.0 register 10(00000008), read-only ignoring it
PCI: 00:00.0 register 10(00000008), read-only ignoring it
PCI: 00:00.0 register 10(00000008), read-only ignoring it
ASSIGN RESOURCES, bus 0
PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io
PCI: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmem
PCI: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem
PCI: 00:11.1 20 <- [0x00001c40 - 0x00001c4f] io
PCI: 00:11.2 20 <- [0x00001c00 - 0x00001c1f] io
PCI: 00:11.3 20 <- [0x00001c20 - 0x00001c3f] io
PCI: 00:11.5 10 <- [0x00001000 - 0x000010ff] io
PCI: 00:11.5 14 <- [0x00001c50 - 0x00001c53] io
PCI: 00:11.5 18 <- [0x00001c60 - 0x00001c63] io
PCI: 00:11.6 10 <- [0x00001400 - 0x000014ff] io
PCI: 00:12.0 10 <- [0x00001800 - 0x000018ff] io
PCI: 00:12.0 14 <- [0xfeb00000 - 0xfeb000ff] mem
ASSIGNED RESOURCES, bus 0
done.
Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06
PCI: 00:01.0 cmd <- 07
PCI: 00:11.0 cmd <- 87
PCI: 00:11.1 cmd <- 81
PCI: 00:11.2 cmd <- 01
PCI: 00:11.3 cmd <- 01
PCI: 00:11.4 cmd <- 00
PCI: 00:11.5 cmd <- 01
PCI: 00:11.6 cmd <- 01
PCI: 00:12.0 cmd <- 83
done.
Initializing PCI devices...
PCI devices initialized
sizeram: returning 0x1fc00 KB
sizeram: NOT returning 0x1fc00 KB
sizeram: there are still some SPD problems ...
sizeram: SO we return only 0x10000 KB
totalram: 64M
Initializing CPU #0
Enabling cache...
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) type: WB
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range:   64MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
call intel_enable_fixed_mtrr()
call intel_enable_var_mtrr()
Leave setup_mtrrs
done.
Max cpuid index    : 1
Vendor ID          : CentaurHauls
Processor Type     : 0x00
Processor Family   : 0x06
Processor Model    : 0x07
Processor Mask     : 0x00
Processor Stepping : 0x08
Feature flags      : 0x00803035

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled
Disabling local apic...done.
CPU #0 Initialized
Mainboard fixup
IDE enable in reg. 50 is 0x7
set IDE reg. 50 to 0x7
IRQs in reg. 4c are 0x4
setting reg. 4c to 0x4
enables in reg 0x40 0x8
enables in reg 0x40 read back as 0xb
enables in reg 0x9 0x8f
enables in reg 0x9 read back as 0x8a
command in reg 0x4 0x81
command in reg 0x4 reads back as 0x7
Ethernet fixup
Configuring VIA LAN
RTC Init
Invalid CMOS LB checksum
Final mainboard fixup
Southbridge fixup
setting southbridge
Assigning IRQ 12 to 0:11.2
  Readback = 12
Assigning IRQ 12 to 0:11.3
  Readback = 12
Assigning IRQ 10 to 0:11.5
  Readback = 10
Assigning IRQ 10 to 0:11.6
  Readback = 10
setting ethernet
Assigning IRQ 11 to 0:12.0
  Readback = 11
setting pci slot
Checking IRQ routing tables...
/home/newbell/LinuxBios/freebios/src/arch/i386/lib/pirq_routing.c:
24:check_p
irq_routing_table() - irq_routing_table located at: 0x0000a440
done.
Copying IRQ routing tables to 0xf0000...done.
Verifing priq routing tables copy at 0xf0000...failed
Wrote linuxbios table at: 00000500 - 00000664  checksum 48cc
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.2
   203:init_bytes() - zkernel_start:0xfff00000  zkernel_mask:0x0000ffff
Searching for 16 byte tags
    64:rom_read_bytes() - overflowed source buffer. max_block = 15
init_bytes found 0 tags
Found ELF candiate at offset 0
New segment addr 0x94000 size 0x74e8 offset 0x60 filesize 0x396c
(cleaned up) New segment addr 0x94000 size 0x74e8 offset 0x60 filesize
0x396c
Loading Segment: addr: 0x0000000000094000 memsz: 0x00000000000074e8
filesz: 0x00
0000000000396c
Clearing Segment: addr: 0x000000000009796c memsz: 0x0000000000003b7c
Jumping to boot code at 0x94000
ROM segment 0x4041 length 0x0006 reloc 0x9400
Etherboot 5.0.8 (GPL) Tagged ELF for [VIA 86C100]
Boot from (N)etwork or from (L)ocal? clocks_per_tick = 420319
N
Probing...[VIA 86C100]Found VIA 6102 ROM address 0x0000
rhine.c v1.0.0 2000-01-07
IO address 1800 Ethernet Address: 00:00:F0:91:58:39
Analyzing Media type,this will take several seconds........OK
Linespeed=10Mbs Fullduplex
The PCI BIOS has not enabled this device!
Updating PCI command 0003->0007. pci_bus 00 pci_device_fn 90
Searching for server (DHCP)...
.Me: 165.213.172.236, Server: 165.213.172.155, Gateway 165.213.172.1
Loading 165.213.172.155:/tftpboot/vmlinuz.xterm ...(ELF)...
...................
.......................................................................
.......
.......................................................................
.......
.......................................................................
.......
.......................................................................
.......
.......................................................................
.......
.......................................................................
.......
.......................................................................
.......
....................................................................don
e
rhine disable
Unknown bootloader class!
type=0x000101C0
data=0x000989CE
Firmware type: LinuxBIOS 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030318/24cef14f/attachment.html>