Gigabyte GA-7DXR

[Antony Stone]

On Thursday 19 June 2003 12:02 pm, Stefan wrote:

> What does this mean, I'm a newbie ;)

It means you should type the two commands "lspci" and "lspci -v" on the 
machine you would like to run LinuxBIOS on, and then post the results back to 
this list so we can see what bits are on the motherboard you want to use.

Antony.

> ron minnich wrote:
> >lspci first :-0
> >
> >lspci
> >lspci -v
> >
> >ron
>
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios

-- 

Never write it in Perl if you can do it in Awk.
Never do it in Awk if sed can handle it.
Never use sed when tr can do the job.
Never invoke tr when cat is sufficient.
Avoid using cat whenever possible.