EPIA PCI slot
rminnich at lanl.gov
Thu Jun 12 14:34:01 CEST 2003
On Fri, 13 Jun 2003, Andrew Ip wrote:
> > The reason I was not getting interrupts on devices in the pci slot on the
> > EPIA is because they were not set to be bus masters, so they would never
> > generate interrupts. A quick write to the command register fixed the
> > problem. Command register is being set to 0x02. It should be set to
> > 0x06. a 6 to 4.
> Thanks for the catch. IIRC, I did have extra ethernet card working before.
PLEASE do not patch linuxbios to enable this.
More information about the coreboot